Beginner Mountain Bike Skills

Mountain biking is an exciting sport that can be

enjoyed by anyone who knows how to ride a bike.

Compared to the average bike ride, it does present

some danger. Therefore, you should master these

basic skills before you hit the trails or the

dirt.

You can practice these beginning skills at a local

park, school, bike path, or simply around your

house. If you can, try to find a location with

a steep hill.

Get a feel for your pedals

Practice moving your foot away from the pedal,

first while sitting on your bike with one foot on

the ground. Next, move on to releasing and

replacing your foot while pedaling around for a

bit. Those with toe clip and clipless type foot

pedals will want to spend a bit more time

practicing.

Sit and spin for position

Simply sit on your bike and pedal around. You

should keep your arms slightly bent. You should

also adjust your seat height so your leg is 70 to

90 percent extended at the bottom of every stroke

on the pedal. Keep your body relaxed, as there

will never be a position where you should have

either your knees or your elbows locked.

Shifting gears

Get a feel for shifting gears with your bike. The

higher gears are harder to pedal and will go

faster while the lower gears are easier to pedal

and will help you ascend hills. As you get to

steeper hills, its best to shift before you get

to the hill rather than while your on it.

Coasting

You should spend a bit of time coasting while

standing on your pedals, without actually sitting

on the seat. Keep your arms bent but don't lock

your knees. Now, try experimenting with shifting

your body towards the rear end of the bike.

Pedal while standing

You should get as comfortable as you can with

pedaling while standing on your bike. Try lifting

yourself off the seat while standing on the pedals,

then crank them around. You should try this in

higher gears on flat ground then again in lower

gears while on a hill.

Dropping down a curb

Try finding a curb where you can easily get to the

upper portion of it. Practice at a moderate speed,

standing and coasting right off the curb from the

upper level to the lower level. Try this at

different speeds until it becomes second nature.

Once you practice these techniques and get the

hang of them, you'll be able to hit the trails feeling

comfortable on your mountain bike. Even though it

may take some getting used to, it'll become second

nature before you know it.

 

 
Translate Page Into German Translate Page Into French Translate Page Into Italian Translate Page Into Portuguese Translate Page Into Spanish Translate Page Into Japanese Translate Page Into Korean

More Articles

 

 

Search This Site

 



Related Products And FREE Videos





 

More Articles


Framing Materials

... it stiff enough for bicycle frames, which will in turn make it that much heavier. Relatively inexpensive to produce, you'll find this material in trail bikes, city bikes, and even entry level mountain bikes. There are some bikes that come with a chromoly seat tube, while the rest is high tensile steel. ... 

Read Full Article  


Introduction To Mountain Biking

... biker. It will also take ambition and practice to succeed as well as conquer the course. Like all other sports, it takes time and practice. Those just beginning will have to get past the bumps and bruises from falling off the bike. Selecting your mountain bike The bike you select is more of a personal ... 

Read Full Article  


The Bunny Hop

... on the bike then absorb the impact with the arms and the legs. It's often times a misconception that a bunny hop without toe clips is achieved by rotating forward on the handlebars. Lifting up on a mountain bike while standing next to it is quite difficult to hold on to the handle bars. The bunny hop ... 

Read Full Article  


How To Use A Chain Tool

... the roller. Be very careful, as you want to stop turning when the pin is right at the edge of the roller, before it moves through the outer side plate. Now, turn the tool in the other direction, and back it out of the roller. Set the tool to the side, then work the chain very gently from side to side ... 

Read Full Article  


Mountain Bike Anatomy

... ring to the cogs. 5. Chain ring - The toothed rings that attach to the crank to hold the chain. 6. Crank - The lever that extends from the bottom bracket to the pedal, transferring the power to the chain rings. 7. Derailleur - The mechanism for moving the chain from one cog to another. 8. Down tube - ... 

Read Full Article